Useful MARLIN code
G92E0
Reset printerM503
Current settingsM83
Relative extrusionM92 Exx.xx
Set steps per mmM500
Store current settingsG1E100F100
Extrude 100mm, feed 100mmM104 SXXX
Set extruder temp
New Steps per mm = (Current steps per mm) x [100 / (measured distance filament traveled)] measured 101.3mm. current steps/mm is 93. So, 93 x (100 / 101.3) = 91.80
Calibrating filament
- Set the nozzle temp
- Set the steps per mm you want
- Reset extrusion state
- Set relative extrusion
- Extrude 100mm with feed 100mm(%?)
M104 S240 M92 E100 G92 E0 M83 G1 E100 F100
Filament specific steps for CR10
Filament | Vendor | Steps per/mm | MARLIN |
---|---|---|---|
DARK GRAY EASYPRINT | EASYPRINT | 95 | M92 E95 |
LIGHT GRAY 3kg | EASYPRINT | 96.5 | M92 E96.5 |
LIGHT GRAY | PRIMAVALUE | 97 | M92 E97 |
LIGHT GRAY | PRIMA | 106.21 | M92 E106.21 |
Silver | PRIMA | 100 | M92 E100 |
Clear | DEVIL | 100 | M92 E100 |
GOLD | DEVIL | 99.8 | M92 E99.8 |
BLACK | DEVIL | 102 | M92 E102 |
White | DEVIL | 114.1 | M92 E114.1 |
Light Gray | DEVIL | 119.31 | M92 E119.31 |